— COMPACT AND CONNECTED DEVELOPMENT LTc1 1–8 points
紧凑与连通开发 LTc1 1–8 分
To conserve land and ecosystem resources by encouraging development in areas with existing infrastructure. To promote livability, walkability, and transportation efficiency, including reduced vehicle distance traveled and associated emissions.
通过鼓励在已有基础设施的区域开展开发,保护土地与生态系统资源。促进宜居性、可步行性与交通效率,包括减少车辆行驶里程及相关排放。
Achievement Pathways Points Commercial Interiors 1–8
达标路径:1–8 分
Option 1. Base Building Certified with LEED BD+C LEED BD+C-certified Base Building 1–8
选项 1. 基础建筑通过 LEED BD+C 认证(1–8 分) 或 选项 2. 周边密度(1–3 分) 和/或 选项 3. 公共交通可达性(1–5 分) 和/或 选项 4. 可步行区位(1–3 分)。上述选项可任意组合,最高 8 分。
OR
选项 1. 基础建筑通过 LEED BD+C 认证(1–8 分) 项目所在建筑获得 LEED v4/v4.1 BD+C 认证,且在 LTc:周边密度与多元用途 或 LTc:优质公共交通可达性 上得分;或所在建筑获得 LEED v5 BD+C 认证,且在 LTc1:紧凑且互联互通的开发 上得分。对应分值按表 1 换算。
Option 2. Surrounding Density 1–3
或组合下列选项,最高 8 分:
AND/OR
选项 2. 周边密度(1–3 分) 项目边界外 0.25 英里(400 米)偏移范围内,既有建筑平均密度达到表 2 数值。可使用独立住宅/非住宅密度,也可使用综合密度值。
Option 3. Access to Transit 1–5
和/或 选项 3. 公共交通可达性(1–5 分) 项目所在建筑任一功能入口须位于以下步行距离内:
AND/OR
上述站点合计服务须达到表 3 的最低班次要求,工作日与周末均须满足。每条合格线路仅统计一个方向的班次;若同一线路在步行距离内有多个站点,仅其中一个站点的班次计入;规划站点须已选址、已获资金并于入住证明出具之日前开工,且在入住后 24 个月内投运。
Option 4. Walkable Location 1–3
和/或 选项 4. 可步行区位(1–3 分) 项目所在建筑通过 Walk Score® 或表 4 的用途邻近性要求满足区位效率要求:从任一功能入口步行 0.25 英里(800 米)范围内有现有且向公众开放的用途。限制条件:每个用途只能计一次;同一用途最多计两处;被计入用途须至少覆盖五类中的三类。
Option 1. Base B uilding Certified with LEED BD+C (1 –8 points) Locate in a building certified with LEED v4/v4.1 BD+C that earned either LTc: Surrounding Density and Diverse Uses or LTc: Access to Quality Transit, or locate in a building certified with LEED v5 BD+C that earned LTc1: Compact and Connected Development.
Table 1. Points for Buildings Certified with LEED BD+C Rating System Credit Points Earned Equivalent ID+C Points LEED v4 or LEED v4.1 LTc: Surrounding Density and Diverse Uses 1 1 2 2 3 3 4 or more 4 Rating System Credit Points Earned Equivalent ID+C Points LTc: Access to Quality Transit 1 1 2–3 3 4–6 4 LEED v5 LTc1: Compact and Connected Development 1 1 2–4 4 5–6 8 OR Meet any combination of the options below for a maximum of 8 points.
Option 2. Surrounding Density (1– 3 points) Locate in a building where the surrounding existing density within 0.25 miles (400 meters) offset of the project boundary meets the values in
Table 2. Use either the separate residential and nonresidential densities or the combined density values.
Table 2. Points for Average Existing Density Within 0.25 Miles (400 Meters) Combined density Separate density Points Sq. ft. per acre of buildable land Sq. m. per hectare of buildable land Residential density (DU/acre) Residential density (DU/hectare) Nonresidential density (FAR) 22,000 5,050 7 17.5 0.5 2 35,000 8,035 12 30 0.8 3 NOTE: DU = dwelling unit; FAR = floor area ratio
AND/OR
Option 3. Access to Transit (1– 5 points) Locate any functional entry of the building in which the project is located within either:
Table 3. Both weekday and weekend trip minimums must be met. For each qualifying transit route, only trips in one direction are counted toward the threshold.
Table 3. Minimum Daily Public Transit Service Weekday Trips Weekend Trips Points 72 30 2 132 78 3 160 120 4 360 216 5
AND/OR
Option 4. Walkable Location (1– 3 points) Locate in a building that meets the location efficiency requirements in Table 4 via Walk Score® or proximity to existing and publicly available uses within a walking distance of 0.25 miles (800 meters) from any functional entry.
Table 4. Points for Location Efficiency Walk Score Proximity to Uses Points 60–69 4–7 1 70–79 8–10 2 80 or more ≥ 11 3 The following restrictions apply:
• A walking distance of 0.25 miles (400 meters) by existing or planned bus, streetcar, or informal transit stops
• A walking distance of 0.25 miles (800 meters) by existing or planned bus rapid transit stops, passenger rail stations (i.e., light, heavy, or commuter rail), or commuter ferry terminals The transit service at these stops and stations in aggregate must meet the minimums listed in
• If service varies by day: o For weekday trips, count the weekday with the lowest number of trips. o For weekend trips, only count the weekend day with the highest number of trips.
• If a qualifying transit route has multiple stops within the required walking distance, only trips from one stop are counted toward the threshold.
• Planned stops and stations may count if they are sited, funded, and under construction by the date of the LEED project’s certificate of occupancy and are complete within 24 months of that date.
• A use may be counted as only one use type (e.g., a retail store may be counted only once even if it sells products in several categories).
• No more than two uses in each use type may be counted (e.g., if five restaurants are within walking distance, only two may be counted).
• The counted uses must represent at least three of the five categories. TRANSPORTATION DEMAND MANAGEMENT